Bubble Cut

Bubble Cut

Step by Step silhouette cutting vinyl

QuicKutz Silhouette machine is a great companion for any crafter. It is a very versatile machine that can cutting many materials. One of the most popular materials being cut vinyl. Silhouette vinyl is available directly from QuicKutz, but any manufacturer will be vinyl compatible with the machine of the silhouette. Vinyl outline the machine is just typical sign making vinyl, and after all the silhouette is just a miniature version plotter cutting a commercial.

It's really easy to cut vinyl on a machine in silhouette. There are things that only a few know that really make use of Vinyl is much easier and more enjoyable. I personally have heard very few people who are really frustrated with vinyl cutting. It really is not that difficult, only must know the right steps and be a pleasant experience.

Vinyl silhouette cutting steps

1.Understand vinyl. Uncut Vinyl consists of two parts. The vinyl itself and the support material. You just want to cut through the layer of vinyl to your machine and not supported well. Almost never want to machine to cut through the vinyl and backing. The silhouette has a whole series of adjustments so you can make the blade cut through the vinyl only. You also want to make sure you are cutting all the way through the vinyl layer, if not quite cut all the way through it becomes very difficult if not impossible, to eliminate unwanted vinyl material. You may have to experiment a bit to get your own dial in.

2.With the proper cutting can be done now weeds or remove unwanted parts of your design. This is an important part of the process of applying vinyl. Want to leave only the items you want to see vinyl in their completed project and a larger square of backing material.

3.You do not have to use the transfer belt, but if not you may want had. This allows you to drop all vinyl items at a time when the support material and transfer it to your project. transfer belt has a soft adhesive is very similar to tape, but comes in much larger sizes to work with vinyl. So I will cover all transfer ribbon cutting and rub down. Then trim any excess around the plaza of the support material. Now you have a sandwich of backing material and transfer belt design with a vinyl padding. At this point you have a piece that is willing to sell to somebody for their own final use or is transportable to the place of final application.

4.The last step is the application and is really very simple. Just remove the backing material to expose the adhesive vinyl. You now have all the vinyl perfectly willing to tape transfer and ready to apply. Then simply sticking to where it wants it. It is best applied lightly and make sure you are satisfied with the alignment. When ready, you can give a good rub down. A squeegee or an application tool is useful at this time to meet all air bubbles and get the vinyl stuck.

5.Next remove the transfer belt. The vinyl has a more aggressive adhesive transfer tape is so you can remove the tape transfer and leave behind the vinyl. There are places that the vinyl to try to reach the transfer belt. This is normal. Remove the transfer sheet at 180 degrees. Work slowly and watch to ensure the vinyl stays down. If you try to find just lay down and rub it a little until he falls down. Be patient.

That's it. Working with vinyl figure is actually very simple. You just need to know all the appropriate measures and can start doing project after project. I wish you all the best with your projects future and hope you have a day of good vinyl!

About the Author

Let us share all our vinyl knowledge with you at
ExpressionsVinyl.com
. We have years of experince in vinyl crafting and one of the largest selections of vinyl around at rock bottom prices. Learn more about
Silhouette Vinyl